How to write string harmonics your player can actually play
There are 2 types of string harmonics, natural and artificial. Here's how each sound is produced, which pitches you can get, and how to notate both.
By Saad Haddad, composerHere's the video this post comes from (5 minutes), or you can read it below.
- The 2 types of string harmonics
- Natural harmonics and lightly touching a node
- The pitches you can get on each string
- Leave it up to the player which node to hit
- A small circle or a small zero
- Artificial harmonics, for any high pitch we want
- The diamond shape note head
1. The 2 types of string harmonics
There are 2 types of string harmonics, natural and artificial. These sounds follow the same underlying principles, no matter what string instrument you're writing for.
It could be the violin or the cello, or even the guitar or the harp. As long as the instrument has strings, what I'm about to say here is going to apply.
Entirely based on the pitches of the open strings
Manipulating the length of the string itself
2. Natural harmonics and lightly touching a node
Natural harmonics are produced when a player lightly touches a node on a string with one hand, while the other hand activates the vibration of that very same string.
The activation of the string can also occur through plucking, as long as the other hand is still lightly touching a node.
- 1One hand lightly touches a nodeOn a string.
- 2The other hand activates the vibrationOf that very same string. This can also occur through plucking.
- ?Where exactly do you lightly touch?That location determines the actual pitch you're going to hear.
The location of where exactly you lightly touch this node determines the actual pitch you're going to hear.
Keep in mind there's a very limited set of pitches you can get using this method. The good news is that it's very predictable what those pitches are going to be.
3. The pitches you can get on each string
We can actually determine this for each string through what's called the harmonic series. I'm not going to explain in depth what this series actually is in any scientific way. What's important to know is that this series of notes naturally exists on every vibrating string.
For example, if we take a look at the violin's G string, these are the possible natural harmonics that could sound.
In a similar fashion, if we head over to the violin's adjacent D string, we get those same intervallic relationships, just transposed one perfect fifth up.
4. Leave it up to the player which node to hit
Most of these pitches can be played by basically any trained violinist, as long as they're lightly touching the corresponding node that goes with each of those pitches.
In terms of which nodes those are, lucky for you, you don't really need to intrinsically know that to compose your piece.
In my experience, I find that it's best to leave it up to the player which node to actually hit. As long as they know the sounding natural harmonic that you want, they'll find the corresponding node on that string that best fits their needs for that passage.

Fair warning about the higher partials
The higher up you go in the harmonic series, the more difficult it will be for the player to execute that harmonic.
So please plan accordingly with your player if you plan to use a partial that's, say, higher than the fourth partial.
5. A small circle or a small zero
What about the notation? With natural harmonics, you're going to see a small circle over the pitch that you want to hear.
Note that this isn't a small zero, it's a small circle. Big difference. A small zero would instead indicate to activate one of the open strings, without pressing anything on it.
If you want to hear a harmonic G above the open G string on a violin, you put the small circle over that G. The D above that gets a small circle too.
This principle follows suit all the way up the harmonic series, on any string capable of vibrating.
6. Artificial harmonics, for any high pitch we want
Once we've understood these principles of natural harmonics, artificial harmonics actually become quite straightforward.
With this type of harmonic, we can basically create any high pitch we want just by manipulating the length of the string itself. Natural harmonics, on the other hand, are entirely based on what the pitches of the open strings are.
Say we want to hear this A flat as a harmonic.
There's no way you're going to hear this harmonic as a natural harmonic on the violin, so we're going to need to play it artificially.
- 1Press one finger down on the A flat2 octaves below the A flat that we want to hear.
- 2Lightly touch the note one perfect fourth aboveAt the very same time, on that same string, with one of the other fingers on that same hand.
What we need to do is press one finger down on the A flat 2 octaves below the A flat that we want to hear. At the very same time, one of the other fingers on that same hand needs to lightly touch the note one perfect fourth above the A flat that you're already pressing down, on that same string.
7. The diamond shape note head
If we were to notate this, it would look strikingly different than the natural harmonic.
First, we need to notate the low A flat with an ordinary note head. This is the pitch that's actually pressed firmly down on the string.
Then we need to notate the note one perfect fourth above this low A flat. In this case, that would be D flat. But we need to be able to differentiate this D flat, because it needs to be lightly touched, not pressed down. The way we do that is to change it to a diamond shape note head.
Notice that there's no need to indicate the sounding pitch, that high A flat 2 octaves above, like we had to do with the natural harmonic.
It's kind of magical in a way, because by doing this we've created a new sound basically out of thin air, without having to rely solely on the natural acoustics of the instrument.
We've created a new sound basically out of thin air.Artificial harmonics
In my second string quartet, you'll hear and see both natural and artificial harmonics working together to create a quasi ethereal atmosphere.
What to do next
Before you hand your harmonics to a player, go through my free engraving checklist, and then read what gets a score performed again and again.
